|
Wire Thickness Used
|
0.8mm
|
|
Type of Material Used
|
T316 marine grade has high corrosion resistance. Also resists attacks by marine and corrosive industrial atmospheres.
Suitable for seacoast atmosphere.
|
|
Wire Count
|
11 x 11 strands per 25mm² (1 inch²) which meets the standards ATSM:A555, ISO:9044 and ASTM:E437-92.
|
|
Powdercoating and surface treatment of Supascreen mesh
|
The pretreatment used does not harm or alter the Integrity of the woven stainless steel mesh surface.
Is finished with a premium powdercoating
Undergoes continuous testing to BS6497:1984 standards
7 year guarantee
|
|
Locking System
|
The PVC co-extrusion has two purposes:
To engage and lock the Supascreen frame
To insulate (isolate) the two materials stainless steel and aluminium from coming into direct contact with each other, which if not seperated will cause galvanic corrosion
The PVC co-extrusion is UV resistant and heat resistant, and is guaranteed for 7 years.
|
|
Aluminium Frame
|
Extruded using 6063-T5 grade aluminium
Treated and powdercoated to a full range of colours.
|
|
Testing for the year 2000 at the NATA certified testing laboratory of Lockwood Australia Pty Ltd in compliance with AS/ISO/IEC 17025-1999
|
AS/NZ 2803 - 1 Supascreen Hinged Door - Pass
AS/NZ 2803 - 2 Supascreen Sliding Door - Pass
AS/NZ 4604 - 1 Window Grille Fixed - Pass
AS/NZ 4604 - 1 Window Grille Hinged - Pass
AS/NZ 4483 - 1 Impact Test - All Products - Pass
AS/NZ 4483 - 2 Slash Test - All Products - Pass
Tested at NATA approved laboratories
Cyclone Test AS1170.2-1989 UV TestRain Deflection Test
|
